The course will be based over 5 days, 3 in the workshop and two days in the study room, and on completion it will enable you to carry out G59/3-3 Testing in front of a DNO witness.
Before you decide to book onto our G59/3-3 Test Engineer Training programme why not have a look at the feedback forms, from the guys who have attended one of our courses. Click Here to view the feedback forms.
The new G59/3-3 engineering recommendations will be in use by early 2018. We have now completely restructured the course to incorporate all of the new parameters and guidelines, which have changed from G59/3-2. This will enable all candidates that qualify through our Test Engineer Course, to be ready to test under the supervision of all DNO witness’s using the parameters from the new G59/3-3 recommendations.
The aim of this training programme is to test and commission any system which falls under G59/3-2 engineering recommendations. I.E Any (SSEG) small scale embedded generator that is rated at over 16 amps per phase.
We can take any competent electrician into the world of advanced testing procedures, we do this in such a way that you will become competent, to stand in front of any DNO witness and produce the test parameters that they demand.
To enable us to do this we have developed a bespoke G59/3-3 Test Engineer Training Course to enable you to commission any system that is using a G59/3-3 Protection Relay Panel. This training can also be used to add an additional income stream to your business as the demand for G59/3-3 test engineers is constantly growing since these tests are required for all generation systems including, PV, Hydro, Wind, Generator and CHP Etc.
And now with the latest changes to ROCOF coming into action the demand for test engineers, who can carry out these upgrades, will be larger than it has ever been in the 10 Years we have been involved in relay testing.
You will be studying and training on the relays using these new ROCOF settings, that will be coming on line later in the year, you should really read the information shown on our ROCOF Changes page by clicking here
These changes may even result in over 40,000 sites being revisited to have the latest changes carried out, this is a massive opportunity for engineers, as there are just not enough engineers in the Country, to carry out that number of test’s.
You cannot get this training anywhere else in the UK so take full advantage and give yourself the leading edge in the industry. Please see below for full course information.
The G59/3-3 Training Programme is broken down into three modules as follows: –
First Module is a theory lecture supported by comprehensive course literature and operated in a free, flowing forum.